locations: Derby UK
overall size of the project: approx. 350M2
system: self-smoothing epoxy screed and clear epoxy seal system
- Manufacturing shop floor
- Prepared by captive shot blasting and 3 phased planetary grinders.
- Apply 1st epoxy dpm primer and allow to cure.
- Fill all minor imperfections or holes and apply 2ndepoxy primer.
- Apply 2-3mm epoxy self-smoothing screed and allow to cure.
- To re-diamond cut all joints and apply the jointing compound.
- To apply clear seals to exposed concrete aggregates.
- Completed in 10 days.